Dispatch open 24/7Same-day field service on every rental
  1. Equipment
  2. Excavators & Loaders
  3. Vacuum excavators
  4. 800 gal Vacuum Excavator, Trailer

800 gal Vacuum Excavator, Trailer

Lumiya Class LT-3800Power Diesel6 on the yard · Dallas

Overview

Exposes existing utilities safely before you bore or trench, and cleans up drilling fluid afterward. A positive-displacement blower and 3,000 psi wash wand break soil without damaging the lines you are looking for.

  • 800 gal debris tank
  • 300 gal water
  • 3,000 psi wash
  • 1,000 cfm blower

Typical jobs

  • Potholing to verify locates
  • Drilling fluid recovery at entry and exit pits
  • Handhole and vault cleanout

Often rented with

Specifications

Specifications for 800 gal Vacuum Excavator, Trailer
Debris tank800 gal
Fresh water300 gal
Blower1,000 cfm, 15 inHg
Water pump3,000 psi @ 4 gpm
BoomHydraulic, 270° swing
Hose6 in
Engine74 hp diesel
Empty weight10,500 lb
Overall length21 ft 6 in
Height9 ft 4 in
Lumiya ClassLT-3800

You will receive a unit in this class that meets or exceeds these specifications. Make and model can vary by branch. If your job needs a specific configuration, add a note to your reservation and the branch will confirm before dispatch.

LUMIYA LEASINGLT-3800 · NTSLUMIYA21 ft 6 in9 ft 4 in

Delivery options

Choose how the unit gets to the job. Transport you arrange yourself is at your own risk, so check the requirements below before you go.

Recommended

Lumiya delivery & pickup

Our driver drops the unit at your site at dawn and collects it when you call it off rent.

  • Hours the site is open and any gate codes
  • Exact drop spot and ground conditions
  • Site safety and PPE requirements
Trailerable

Tow it yourself

Rent one of our trailers or bring your own. We load and check the tie-down before you leave.

  • Tow vehicle rated for the unit plus trailer
  • Matching hitch, ball or pintle
  • Working trailer lights and brakes
Smaller units

Pick up at the branch

For units that fit your truck bed or service body. We load it with the forklift.

  • Bed size and payload checked against the spec sheet
  • Your own straps, or buy them at the counter

What’s included with every rental

Pre-trip inspection

Checked, greased and function-tested at the branch. The signed checklist travels with the unit.

Full fuel, clean machine

Delivered full and washed. Fuel used is billed at the posted pump rate.

Operator orientation

A walk-around of controls, daily checks and safety devices at delivery or pickup.

24/7 field service

Mechanical failure is on us. A tech or a swap unit, the same day.

Similar equipment

Renting questions

How is rental time counted?

A rental day is 24 hours from the time the unit is delivered or picked up. Weekly is 7 days and the 4-week rate covers 28 days. Your quote uses whichever combination of day, week and 4-week rates costs least for your dates.

Will I get the exact model shown?

You will get a unit in this class that meets or exceeds the listed specifications. If your job needs a specific make, attachment or configuration, note it in your request and the branch will confirm before dispatch.

What happens if a unit goes down on the job?

Call dispatch any time. A field technician is sent the same day, and if the repair can’t be done on site we swap the unit. You are not billed for downtime caused by mechanical failure.

Do I need my own insurance?

You can provide a certificate of insurance naming Lumiya Leasing, or add Lumiya Protect, our damage waiver, at 12% of the rental charge. Lumiya Protect covers accidental damage to the unit, less a deductible.

Can you deliver outside the 75-mile radius?

Yes. Most branches deliver farther for longer rentals or multi-unit orders. Distance pricing is quoted by the branch with your reservation.

Is operator training available?

Every delivery includes a walk-around orientation. Formal operator training and certification for aerial lifts, HDD and excavators can be scheduled through your branch.

Not sure this is the right unit?

Tell a branch specialist about the ground, the access and the product you are placing. They will match the machine and attachments to the job.