Dispatch open 24/7Same-day field service on every rental
  1. Equipment
  2. Horizontal Directional Drills
  3. Drilling fluid
  4. Drilling Fluid Mixing System, 300 gal

Drilling Fluid Mixing System, 300 gal

Lumiya Class LT-2300Power Gas8 on the yard · Dallas

Overview

Mixes bentonite and polymer quickly and keeps fluid moving to the rig. Trailer-mounted with its own engine and transfer pump, so it parks beside the drill and runs all day without shore power.

  • 300 gal tank
  • 100 gpm transfer
  • Venturi mixing hopper
  • Trailer tandem axle

Typical jobs

  • Fluid supply for compact and mid-size HDD
  • Batch mixing for longer shots
  • Water transfer on site

Often rented with

Specifications

Specifications for Drilling Fluid Mixing System, 300 gal
Tank capacity300 gal
MixingVenturi hopper with jet nozzles
Transfer pump2 x 3 in centrifugal, 100 gpm
Engine23 hp gas
Hitch2-5/16 in ball
Weight (empty)2,450 lb
Overall length15 ft
Height6 ft 2 in
Lumiya ClassLT-2300

You will receive a unit in this class that meets or exceeds these specifications. Make and model can vary by branch. If your job needs a specific configuration, add a note to your reservation and the branch will confirm before dispatch.

LUMIYA LEASINGLT-2300 · NTSLUMIYA15 ft6 ft 2 in

Delivery options

Choose how the unit gets to the job. Transport you arrange yourself is at your own risk, so check the requirements below before you go.

Recommended

Lumiya delivery & pickup

Our driver drops the unit at your site at dawn and collects it when you call it off rent.

  • Hours the site is open and any gate codes
  • Exact drop spot and ground conditions
  • Site safety and PPE requirements
Trailerable

Tow it yourself

Rent one of our trailers or bring your own. We load and check the tie-down before you leave.

  • Tow vehicle rated for the unit plus trailer
  • Matching hitch, ball or pintle
  • Working trailer lights and brakes
Smaller units

Pick up at the branch

For units that fit your truck bed or service body. We load it with the forklift.

  • Bed size and payload checked against the spec sheet
  • Your own straps, or buy them at the counter

What’s included with every rental

Pre-trip inspection

Checked, greased and function-tested at the branch. The signed checklist travels with the unit.

Full fuel, clean machine

Delivered full and washed. Fuel used is billed at the posted pump rate.

Operator orientation

A walk-around of controls, daily checks and safety devices at delivery or pickup.

24/7 field service

Mechanical failure is on us. A tech or a swap unit, the same day.

Similar equipment

Renting questions

How is rental time counted?

A rental day is 24 hours from the time the unit is delivered or picked up. Weekly is 7 days and the 4-week rate covers 28 days. Your quote uses whichever combination of day, week and 4-week rates costs least for your dates.

Will I get the exact model shown?

You will get a unit in this class that meets or exceeds the listed specifications. If your job needs a specific make, attachment or configuration, note it in your request and the branch will confirm before dispatch.

What happens if a unit goes down on the job?

Call dispatch any time. A field technician is sent the same day, and if the repair can’t be done on site we swap the unit. You are not billed for downtime caused by mechanical failure.

Do I need my own insurance?

You can provide a certificate of insurance naming Lumiya Leasing, or add Lumiya Protect, our damage waiver, at 12% of the rental charge. Lumiya Protect covers accidental damage to the unit, less a deductible.

Can you deliver outside the 75-mile radius?

Yes. Most branches deliver farther for longer rentals or multi-unit orders. Distance pricing is quoted by the branch with your reservation.

Is operator training available?

Every delivery includes a walk-around orientation. Formal operator training and certification for aerial lifts, HDD and excavators can be scheduled through your branch.

Not sure this is the right unit?

Tell a branch specialist about the ground, the access and the product you are placing. They will match the machine and attachments to the job.